I’m always forgetting this when hunting for alloys, information gleened from
http://forums.nicoclub.com/zerothread/81407
Z32 Turbo Alloy Wheels
Wheel size:
16×7.5 with a 45mm offset – Front
16×8.5 with a 35mm offset – Rear
66.06mm hub bore
Bolt patten:
5×114.3 (72-87 ft/lb or 105-118nm)
Stud size:
12mm x 1.25
Currently I have Toyo T1Rs which are ok but the front pushes wide on anything tight, so next time I might try Bridgestone Potenzas S02 (S03 now)
http://www.tyrereviews.co.uk/Tyres_For/Nissan/300ZX.htm
Original front tyre size: 225/50-16
Original rear tyre size: 245/45-16
Here are some wheel offsets that might work
| Front width | Standard offset | +10mm | +15mm |
|---|---|---|---|
| 7.5″ (190.5mm) | 45.0mm | ||
| 8.5″ (215.9mm) | 32.3mm | 42.3mm | 57.3mm |
| 9.0″ (228.6mm) | 25.95mm | 35.95mm | 50.95mm |
| Rear width | Standard offset | +10mm | +15mm |
|---|---|---|---|
| 8.5″ (215.9mm) | 35mm | ||
| 9.5″ (241.3mm) | 22.3mm | 32.3mm | 37.3mm |
| 10.0″ (254.0mm) | 15.95mm | 25.95mm | 30.95mm |
